Manaras-Opera - OPERA SH

O p e r a - SH JACKSHAFT with Hoist - 25 Cycles / Hour, >80 Cycles / Day

Opera-SH, fills the gap between regular jackshafts and gear heads. This is an ultra high-end, heavy duty, V-belt drive operator for industrial High and Vertical Lift Sectional Doors or Rolling Doors and Grilles. It can be wall, hood, or shelf mounted on either side of the door. It incorporates a chain hoist for manual operation with floor level disconnect.

Standard Features

Cast iron pillow block bearings on input and output shafts

Solenoid brake

Emergency chain hoist with electrical cut-out

Accu-cam: one-hand limit setting

Continuous Duty Motor up to 1 HP

5L V-belt, Chain and Sprocket Reduction

#50 Chain and Sprocket on Final Drive

Output shaft speed: 41 rpm

Heavy Duty Reversing Contactor

Full Overload Protection

C2, B2 or D1 Wiring can be very easily set

Pre-wired for Open Override, Safety Reverse, Radio Control

Wall, Hood or Shelf Mounted on either side of the door

Clearance: side room required is 16"

Main Options: Nema 4/12, Nema 4X, Spreader, Hoist on left, Delay on reverse, Timer to close, Double limits, Electronic Control Board. For Nema 7/9, consult factory.

Available Documentation

Specification Sheet
Shop Drawing
3-Part Architect Specifications
Installation & Instruction Manual
Exploded View

Electrical Drawings

Please select the electrical wiring drawing
you wish to view from the menu.

Electronic Control Board Specification Sheet
Electronic Control Board Installation & Instructions Manual

If you do not have the
Adobe Acrobat Reader
click here.