The NEMA 4/12 modification is to be used for car wash applications and areas where dust, water, oil leaks or any other type of condensation is present. The NEMA 4X modification provides protection against corrosive environments.

• NEMA 4/12 or NEMA 4X compliant components
• NEMA 4/12 or NEMA 4X control enclosure
• Continuous Duty TEFC (4/12) or TEFC/TENV (4X) Motor up to 1 HP
• Floor Level Disconnect for manual operation
• 5L V-belt, Chain and Sprocket Reduction
• #50 Chain and Sprocket on Final Drive
• Output shaft speed: 41 rpm
• Heavy Duty Reversing Contactor
• Full Overload Protection
• C2, B2 or D1 Wiring can be very easily set
• Pre-wired for Open Override, Safety Reverse, Radio Control
• Wall, Hood or Shelf Mounted
• Clearance: side room required is 15"