Silencio®:Silent Apt. Style Trolley Operator for
Fast Standard Lift Sectional Doors
>100 CYCLES/DAY
9"/SEC OPENING SPEED APPLICATIONS
The Silencio® RTBH-A.06 is a heavy-duty apartment
type garage door operator designed for use on properly
counter-balanced industrial standard lift sectional doors
which possess high-cycling daily frequency requirements.(1)
The RTBH-A.06 smoothly manages Soft-Starts and
Soft-Stops, therefore reducing the wear and tear of the
complete door system. It also incorporates a drum-band
type solenoid brake, a low vibration braking system, as
well as other integrated enhancement features which
reduce the noise emissions by a magnitude of 4*.
The Manaras-Opera control is based on its legendary Electronic Control Board which delivers high performance and reliability while providing on-board control plus speed managing features.
STANDARD FEATURES
• Electrical Supply:
Single-phase powered operator.
• Motor:
60Hz high starting torque, continuous-duty, switchless motor,
totally enclosed (TEFC or TENV), resilient mounting,
protected against overload.
• Speed Managing Features:
Speed managing device provides enhanced performance and speed, with soft-start and soft-stop capabilities.
• Reduction:
First step in reduction Ax section cogged V-belt drive, additional
step by #41 chain and sprockets. Input shaft is 5/8", supported
by cast iron flanged pillow block bearings. Output shaft is 1",
supported by cast iron flanged pillow block bearings. Offers
an opening door travel of 9"/sec and 6"/sec while closing.
• Drive and Trolley Assembly:
#41 roller chain drive. Dual, 12 gauge, pre-drilled galvanized
tracks provided for doors up to 12ft. in height standard.
Additional track lengths are available (max. door height
acceptable for the operator limit system is 30ft.). Track spacers
3/4" sleeved steel shaft track spacers. Trolley made of cast
aluminum alloy with chain tension adjustment device.
• Clutch:
Friction type, positioned on input shaft, easily adjustable from outside.
• Brake:
Electrically activated drum-band type solenoid brake. Low
vibration breaking system provides positional stability and
noise reduction.
• Manual Operation:
Quick release disconnect arm for manual door operation.
• Electrical Enclosure:
All electrical components are in a Nema 1 enclosure. Hinged electrical enclosure cover.
• Limit System:
Rotary-type oil-impregnated steel cams, commercial grade
switches. Limit shaft is supported by self-lubricating bronze
bushings for increased precision.
Remains in time when there
is a manual operation or after the motor has been removed.
• Accu-cam® Feature:
Precise and quick one-handed adjustment of the limits.
• Non-Resettable Cycle Counter:
6-digit electro-mechanical counter, mounted inside the control
box, counts each complete door cycle providing valuable data
for maintenance scheduling.
• Corrosion Protection:
Frame and control enclosure protected by baked on, long lasting enamel finish. All shafts protected by yellow chromate coating.
• Mounting:
Ceiling-mounted with 8.69" headroom clearance required below the tracks. Anti-vibration mount design.
• Temperature Range:
Working temperature between 0°C to 40°C (32°F to 104°F).
• Dimensions:
Back Room: door height + 4'5" (1350 mm)
Head Room For Tracks : 5.625" (143 mm) above the highest point of door travel
For more details, please consult our Dimensions Drawing.
• Shipping Weight:
Approx. 73 Lbs - 33 Kg + tracks.
• Warranty:
2 Years, per section 6 of our Terms and Conditions of Sale.
CONTROL OPTIONS
• ECB Units (BOARD 070):
24VDC relaying circuit with a 40VA class II transformer, non-volatile memory. Features available: On-board radio receiver, 1.5s delay on reverse, programmable maximum run timer, mid-stop, timer to close (suspension possible from floor level), independent input loop terminal, advance close system, test buttons, reverse wiring detection and door lock sensor. Operating mode selectable on site: C2, B2, D1, E2, T or TS.
• Electronic Monitored (M) Version:
Provides the monitoring of Primary External Entrapment Protection Devices. Includes monitored Nema 4X photo cells (PHOTO 061 standard). In this mode, Ancillary Entrapment Protection Devices (optional) may be used to supplement primary entrapment protection, such as non-monitored photo cells, 2-wire non-monitored sensing edges and pneumatic sensing edges.
Certifications: ANSI / CAN / UL 325.

Note: ANSI/CAN/UL325 and CAN-CSA C22.2 No. 247 apply to units intended to be used in ordinary locations in accordance with the Canadian electrical code, part I and the Nationalelectrical code, NFPA 70, respectively.
MAIN OPTIONS
• Control Accessories:
Angled terminal strip allows for the connection of 3-button stations (one supplied with the operator), non-monitored sensing edges, non-monitored photo cells, one push-button radio control (external strip), ceiling pull switches, key switches, loop detectors, external interlocks, universal auxiliary output module. 2A fuse protected 24VAC output is available for accessory power supply.
• Control Modifications:
Alternate control available with separate control panel, optional
separate brake resistor, transformer panel 480V to 240V/600V
to 240V etc... consult inside sales.
• Mechanical Modifications:
Dual trolley drive, trolley hoist, very heavy-duty front idler, minimum depth mounting, etc...consult inside sales.
• Electricall Modifications:
Warning light wiring, contactor-ecb driven, etc...consult inside sales.
• Environmental Modifications:
Available for Nema 4/12 type applications with separate control panel, nickel plated chain, birds nest protection, etc... consult inside sales.
• Suggested Applications:
• Apartment Complexes / Office Buildings
• First Responder / Emergency Vehicle Facilities
• Automotive Dealerships / Transportation Facilities
• Airports / Military Facilities
• Energy Management / Energy Efficient / LEED Buildings.
(1) For doors weighing above 750 Lbs, the system requires a brake resistor ($).
* This model is 4X quieter than our Premium Trolley Apartment model OTBH-A.05.
** For additional specifications and in order to optimize the operator’s performance, please contact our inside sales department for assistance in selecting the appropriate hardware kit for your application.**
|